Custom in-ear buyer's guide

Custom In-ear Monitor Buyer’s Guide

Page 2: ljokerl’s custom in-ear monitor recommendations

While there are dozens of excellent universal-fit earphones out there, in many ways custom in-ear monitors are still the holy grail of portable audio. There is a lot more variety among CIEMs than may appear at first, with designs ranging from straightforward single drivers to complex networks with multiple crossovers. Below are some of the best custom IEMs I’ve heard.

UNDER $500

Custom Art Music One
Custom Art Music One

 

Custom Art Music One (est. $260) – This single-driver release from Poland-based Custom Art is an excellent value, combining the superb noise isolation of silicone shells with a single balanced armature driver delivering an organic, coherent sound. The Music One sounds smooth and natural, and the lightweight, low-profile silicone shells put its fit and comfort among the very best out there. The Music One also offers more customization options compared to other silicone CIEMs and comes with an excellent cable, all for a price one might pay for a similarly-performing universal earphone. Read full review

[divider]

Alclair Reference
Alclair Reference

 

Alclair Reference ($399) – Starting at $399, the Alclair Reference is a USA-made monitor that combines a versatile sound signature with the usual isolation, fit, and customization options. The sound signature of the Reference makes it a great crowd pleaser – the triple-BA setup produces a slightly warm, spacious, and energetic sound with good clarity and detail. Though the treble can be a bit hot at times, it is an excellent compromise between accuracy and musicality and a potential upgrade to some very popular universal monitors, such as the VSonic GR07. Read full review

[su_divider top=”no”]

[sc name=”CIEM_BG_ad”]

$500 TO $1000

1964EARS V6-Stage
1964EARS V6-Stage

 

1964EARS 1964 V6-Stage ($699) – These flagship earphones from Portland-based 1964EARS are very well-made and the sound hits the sweet spot, falling just warm of neutral with a bit of added bass, mids that are clear but not thin, and crisp, if slightly hot, treble. It is unforgiving when it comes to poorly mastered tracks and can accentuate sibilance, but overall the V6-Stage is an extremely competent earphone that should work for professional applications as well as consumer audio. The V6-Stage is not dissimilar to the Alclair Reference above, but boasts more refinement and better technical ability all around. Read full review

[divider]

Unique Melody Miracle
Unique Melody Miracle

 

Unique Melody Miracle ($950) – The Miracle was one of my first custom monitors, and remains one of my favorites with its balanced and laid-back sound. It is coherent, spacious, and smooth, offering excellent end-to-end extension and a realistic, slightly distanced soundstage. It’s a versatile sound suited for a variety of listeners, and one that is as impressive today as it was years ago. The Miracle improves on the V6-Stage with smoother treble and a slightly more spacious presentation. Read full review

[su_divider top=”no”]

[sc name=”CIEM_BG_ad”]

OVER $1000

JHAudio JH13 Pro Freqphase
JHAudio JH13 Pro Freqphase

 

JH Audio JH 13 Pro ($1099) – A staple of the audiophile scene since its release in 2009, the JH13 Pro delivers clarity and resolution unlike anything else I’ve heard. Its sound is effortless, nuanced, and refined across the entire frequency range, complete with fantastic instrument separation and imaging. There is a bit of bass boost providing a richer, fuller sound but the JH13 is still extremely transparent, endowed with an uncanny ability to simply fade away, leaving only the music. Read full review

[divider]

Hidition NT 6
Hidition NT 6

 

Hidition NT 6 (est. $1200) – The NT 6 model from Korea-based Hidition is one of the best earphones I’ve had the pleasure of trying, combining incredible clarity and resolution with tight, level bass and extended, energetic treble. Top to bottom, the NT 6 does not lack presence at any frequency and is the ideal earphone for a leaner sound with a neutral-to-bright tone. Hiditon’s excellent build quality, deep-sealing shells, and plethora of customization options, including some very unique faceplates, are just icing on the cake. Read full review

[su_divider top=”no”]

That rounds out some of my top picks among custom IEMs in every price range. For some universal monitor recommendations, check out the Earphone Buyer’s Guide. For more of my reviews of custom and universal-fit monitors, see the IEM comparison table.

Questions or comments? Leave them below.

Page 1: average_joe’s recommendations

SHARE.

ABOUT AUTHOR

average_joe

average_joe

Having a life-long love of high-quality audio and gadgets, average_joe got back in touch with his audiophile side after a hiatus caused by life. His focus became headphones and related gear as the size and price fit his life better than home audio. He believes the entire audio chain is important, and likes to continue to think past the headphone and on into the head, as he believes understanding the details of how we hear will lead to a better audio experience.

RELATED POSTS

39 Responses

  1. Sorry! I forgot to write one thing. My dream in-ear sound signature, which I’m gonna be on a constant hunt for until the day I die, is one where I’m completely drowned by the music. Warm and open. Thank you!

  2. Hi! I hope all is well with you!!

    I’m wondering if you can help me with a suggestion for a CIEM. I’m just about to buy my first pair and I’ve been vacuuming the internet for reviews and suggestions. I’m gonna use them mainly for daily listening, but also when running monitors for the worship team in church. My budget is $800 and lower (or 800 eur since I live in europe, so no stupid customs and tax :D).

    Needless to say, I want good quality sound. But for me, the sound signature is by far the most important thing. I use Shure SE315 day-to-day which to be honest sound quite weird. But I choose them all the time over my UMPro 30 and Re-400 because of the sound signature.

    The sound signature I’m after is a very mid-centric one. I live for mids; I don’t care how good something sounds, if it sounds dry then there’s no joy in the music and I want to kill myself. With mids, I mean 2kHz. Yet, I want a very open sound with sparkly highs. I suppose the keywords I’m looking for is open and clear.

    Describing each area
    Bass: Quite little. Tight, controlled, detailed. Low quantity, high quality
    Mids: A lot. I don’t really care if it’s honky or hollow sometimes, if that’s what it takes
    Highs: Detailed, crisp, sparkly. I guess I prefer an emphasis on the upper treble (10kHz+). I still want the hig-mid/low-treble (~4kHz) to be there but not too much.

    Silicone or acrylic doesn’t really matter. I suppose acrylic would be better since I always have to take them in/out when I run monitors at church, but it’s not a deciding factor

    Currently it seems like the Mi-Performer Pro is the closest match, but I’m considering these ones also:
    UM Mage
    ProGuard P2+1
    Custom Art Pro330v2?
    ACS T1 Classic

    Thank you soo much in advance. This site is so amazing!!

  3. Hi Joe/Joker,
    Could you please help me with my dilemma :p
    im thinking to buy Custom IEM to use for my daily commute. At first, i was thinking to get LEAR BD4.2 but after i seen the shell which is quite big i changed my mind. Because i want to have an earphone that doesn’t look too big for my small ear.
    and after reading some reviews, I have read AWW W-500, Hidition NT6 pro or JH16 might be good for me. But which one from these headphones have a really good sound and good looking appearance?
    thank you.
    regards,
    johan

  4. Hi, great reviews and very helpful! Both of them seem to be really good, the price difference is about $130 with the current discount on 1964 ears

  5. Hi Joe, thanks so much for replying! I am currently trying to decide whether to get the PS6 or the RSM. As they are around the same price, which do you think offers more value for money? Are they particularly outstanding for its price?

    Thanks,
    Kelvin

  6. Hi Kelvin, thanks for reading! I have heard all on the list, but not the AUD 7X. Compared with the W3, the RSM has the most different presentation, as it isn’t quite as mid-forward. The PS and AUD series are both more mid-forward, with the PS series being more enveloping and 3D vs. the wider presentation of the AUD series. The Fusion 11 is between the RSM and PS series.

    The PS and Fusion are smoother, but not quite as warm as the W3 while the RSM and AUD series articulate details more, and the AUD series is punchier.

    Let me know if you have additional questions.

    Cheers,

    Joe

  7. Hi Joe! Very informative article. This has become my go-to page as I look for my first CIEM. I have a budget of $500-$750, and am primarily looking at the Perfect Seal PS6.

    Other CIEMs I am looking at include:
    – Perfect Seal Fusion 11
    – Perfect Seal PS4
    – Alclair RSM
    – AUD 6X and 7X

    Have you ever tried these CIEMs? Which one would you most recommend?

    I am upgrading from a Westone 3, if that matters.

    Thanks,
    Kelvin

  8. Hi Lucky, it seems like it may be Sensaphonics with their active ambient, which is essentially allowing you to control how much sound gets pushed back to your ears via a microphone system. Another manufacturer, ACS, also offers the same thing with their Live! series ambient processor.

    Another option is to get whatever CIEM you want and use a mixer to mix in the other’s mixes with your own, and a click track. With enough channels, you can adjust the volume independently on each to focus on what you want to focus on. This option does require more setup, at least at first.

    A third, but not necessarily recommended, option is an ambient port in the CIEM that allows the CIEM to be open to the outside by opening a port, which can be sealed for a normal fit. The problem is, once the port is opened, the bass becomes very lacking, but this is the most economical option.

    Please let me know if you have any questions or comments.

    Cheers,

    Joe

  9. I was at NAMM 2015 and spoke to about 5 exhibitors about custom in-ear monitors (CIAM’s). Just one company, in Chicago run by a PhD. audiologist, offered a custom-fit pair that could be fitted to work in two (2) different environments that I need: (1) Stage or studio where near complete external noise cancellation is desired sought. (2) Rehearsal situations where I want to ear the musicians around me AND a click-track from an electronic metronome (e.g., a DB-90). I’m heading to Chicago next week looking for a custom fitting and ordering a pair. Do you happen to know the Illinois based company I’m referring to? Are their other brands of CIAM’s suitable for musicians that can accommodate both scenarios (above). If the recommended brand also works well for stereo listening (audiophile?) that would be a plus. Sorry so many ???’s. Thanks

  10. Hi Anthony,

    I have heard the AAW demo units and have done a write-up.. I haven’t heard the EPH-100 in such a long time, so unfortunately I can’t provide a comparison. As far as isolation vs. foam, CIEMs typically provide a higher level of isolation, but it comes down to fit and a bit of your anatomy.

    Cheers,

    Joe

  11. Do you (Joe or joker) have any experience with AAW CIEMs, particularly the A3H pro (2BA + 1DD)?

    I am currently using a pair of Yamaha EPH-100 and looking to upgrade with a budget of around $400. I was looking at earphones like the DUNU DN2000, FLC8S, Campfire Audio Nova, and Earsonics Velvet (out of budget), but I found out that AAW has some custom IEM at a low price, and I was wondering which one would be better.

    I wish that my Yahama EPH-100 would tone down the bass and mids a little bit, and bring a bit more airiness (?) or treble/detail. Good isolation is also a big concern to me, and I am not sure if the CIEM would isolate more than foam tips on the IEM.

    Thanks in advance.

  12. Hi Matthew,

    Thanks for the additional information. Given what you described and your price point, there is one CIEM that fits: the Fusion 11. If you can go up in price, the EarSonics EM32 is another option. The Fusion 11 has a more V-shaped sound signature while the EM32 is more neutral and mid-prominent. Both offer organic, transparent sounds and balance can be found with the Fusion 11 depending on the ports. For the price, the Fusion 11 is hard to pass up, but the EM32 is a bit more refined.

    Cheers,

    Joe

  13. Hi Joe,

    Thank you for replying. My HiFiMan collection included the HE-400 and the HE-560. I found the HE-400 treble fatiguing, but the overall sound was fun – though I am not a bass-head. I really loved the HE-560 – the only complaint here was the low end was a bit thin sounding to me even with adequate amplification.

    The MrSpeakers Alpha Prime and Ether-C, in comparison with the HiFiMan, come across as more organic sounding. Just very natural and relaxed across the spectrum. But they do bring the bass when it is called for, though they are by no means classified as a bass heavy headphone. The Ether C in particular is very transparent and provides some keen insight into the quality of your audio chain.

    In my case, I will be paring my CIEM with the Chord Mojo primarily, and at times a Cavalli Liquid Carbon.

    If music genres help, I primarily listen to Classic Rock, Classic Country, 80s Rock & Metal, and Singer/Songwriter material (i.e. James Taylor, Paul Simon, James Bay, etc.) – mostly Apple Lossless format but at times I stream my music through Apple’s music service.

    I guess what I am looking for is a CIEM that is fairly transparent & “organic”, with a good balance across the spectrum, without being overly analytical. It needs to be non-fatiguing and should be able to bring some low-end punch when called for but not bloated or boomy – I like the bass to be tight and controlled and not bleed into the mids.

    I would like to remain at or below $1000 including cost of ear impressions for which I am budgeting $150 which I hope is on the high side. Do you think you could provide a budget recommendation at $600 or below as well as what you consider to be my best bet given my needs?

    Cheers,
    Matthew

  14. Hi Matthew,

    Thanks for reading and the question. Unfortunately I have not heard the MrSpeakers headphones, so if you can give me some perspective I should be able to help. For example, do you know how similar the MrSpeaker headphones are to Audeze models? Or a comparison with the SE210 could help, as I would imagine there are significant differences. What HiFiMan headphones have you heard?

    Cheers,

    Joe

  15. First off, thank you both for the hard work involved to put this guide together. This is an indispensable tool for first-time CIEM purchases.

    On that note, I have never owned a CIEM and the only pair of UIEM I have used is the Shure SE210. Most of my listening has been using full-size planar magnetic headphones, primarily HiFiMan and MrSpeakers. The favorites of my collection is a toss up between the MrSpeakers Alpha Primes and the Ether-C.

    With that in mind, can you suggest some CIEMs with similar voicing to the MrSpeakers Primes & Ether-C, or am I way off here in asking such a question?

    I would like to keep my budget at $800 or less. I should also add that I will be using my CIEMs part-time in a noisy lab environment at work where typical consistent noise levels are 75-85dB, so isolation is an important factor.

    Cheers,
    Matthew

  16. Hi Leland,

    Thanks for reading! As a keyboarder, you will do better with a neutral, full-range solution that you can adjust with the mixer. If you want a more powerful bottom-end, the JH13 would be the better choice, but if you are OK saving some $, the V6 will serve you well.

    If you don’t mind buying from overseas, the Hidition Viento-R would be an excellent fit for your needs and has a more natural timbre. The reason I didn’t recommend the Fusion 11 is the V-shape and upper extension/performance that isn’t quite on par with the rest.

    Please let me know if you have any other questions.

    Cheers,

    Joe

  17. Hi Joe! Been reading your reviews….great site!! I’m a professional musician (keyboards) playing in pits for Broadway shows. Sometimes with a small pit band and other times with full 30 piece orchestra that is mic’d. I use an Aviom mixer to control my own mix. I want to invest in a CIEM and based on your reviews considering the following:
    1064 Ears V6 Stage
    JH 13
    Perfect Seal Fusion II
    Can you give me your thoughts as to which might best suit my needs? Or perhaps you have another recommendation? BTW, have never used CIEMs previously so this will be my first pair.
    Many thanks in advance and keep up the great work!
    Leland

  18. Hi Jordan,

    You are right, there is nothing available currently that I know of that would be tuned ideally for a vocalist, is in silicone, and performs well for the price. For vocalists, there are 2 things I think are important: presentation and voicing. Typically, a forward presentation (or mid-centric) works best for vocalists, but voicing is going to make a bigger difference.

    Voicing is the tone of vocals and are dependent on your actual voice. For example, a baritone singer would probably sound better on one CIEM while a countertenor would on another. The countertenor would want to make sure there was enough upper midrange, but not too much while the baritone would want to make sure there was warmth, but not too much thickness.

    The Fusion 11, a very high performing silicone CIEM at your price point, is V-shaped, meaning the midrange is not front and center, but the voicing is very neutral and would work for pretty much any voice type. Dual BAs can be challenged on the low end, but for vocals, they perform fine.

    A dual BA isn’t necessarily better or worse than a hybrid, but just different. BA’s typically have faster, sharper notes that pull the presentation apart more, making nuances easier while the dynamic driver is smoother, but doesn’t carve up the details. The Fusion 11 has a smoothness to it but still presents plenty of detail.

    An option is to see if Perfect Seal will make their PS3 in silicone since they make silicone at a low cost. The Custom Art Pro330v2 would fit, but it cost more than $500 by a bit and from my understanding would provide a brighter, more analytical overall sound. Acrylic can be fine, but you may need to spend extra time at the beginning to ensure the fit is right.

    Hope this helps and let me know if you have any additional question.

    Cheers,

    Joe

  19. Hey Joe, great site.

    Looking for silicone (I’m a vocalist) and at least dual drivers, but nothing seems to be in my price range (around $500USD). It seems I’ll either have to sacrifice for hybrid or acrylic. Which is more important? Is the jump from hybrid to dual noticeable enough on the top end?

    Thanks
    Jordan

  20. Yes, it is a difficult one since joker doesn’t have the Fusion 11 and I don’t have the V6. If you want a performance placement, at least vs. the CIEMs I have rated, the Fusion 11 will most likely fall between 81 and 82 in overall score, which has been the $1K+ CIEM range. I remember discussing the V6 with joker a year and a half ago or so and the image I had in my mind is more of a reference, brighter, bordering analytical sound. I have them in my ears now as I was comparing them to the Alclair Reference. Hopefully my comparison, which is here, will help you make a decision.

  21. I thought so too, since I could not find your opinions on Fusion 11 or Joe’s opinions on V6S. While there are a lot of reviews available for V6S, I could not find any for Fusion 11 apart from joe’s thoughts and a couple of impressions on head-fi, still I am intrigued by these enough that I am confused about which direction I should go. I am so glad you have this site to help consumers make informed decisions and you guys are great with replies and recommendations, I have rarely seen authors of articles so engaged with their readers. Kudos to you!

  22. That could be tough. I haven’t tried the Fusion 11 and as far as I know joe hasn’t tried the 1964s. Maybe joe can get some insight from reading my V6S review.

  23. Thanks joker and joe!

    Really grateful for your replies. Making a new comment since the option to reply is not available for any of your comments. Taking advice from both of you I am down to V6S and fusion 11. Both of them seem to be really good, the price difference is about $130 with the current discount on 1964 ears. Any clue as to how these would compare to each other? Thank you once again!

  24. The vocals are more forward relative to the bass and treble on the 1964 units, but perhaps not more forward in terms of positioning. What I mean by that is, the DN-1000 is a more v-shaped earphone, which means the bass and treble have some boost relative to the midrange. However, it’s also not a hugely spacious earphone so everything in the presentation is pretty forward. The V3 and V6S are less v-shaped, but they (the V6S especially) are also more spacious and airy, so everything is more spaced out.

    In this case, bass quantity decreases and bass quality increases as you go up from DN-1000 to V3 and then to V6S. The V3 in general is kind of a compromise, being bassier than most customs but a bit more boomy compared to true reference sets. It’s still quite a bit better than the DN-1000 when it comes to bass control, though.

    As for genres, that’s really more up to the listener. I tend to consider balanced earphones more versatile because I don’t mind how any genres sound with a flat earphone. That means it would be the V6S or the Custom Art for me.

    If you’re a lower-volume listener you’re actually better because uneven highs are less of a caveat for you. That usually gets more fatiguing as volume is increased. With this consideration the V6S may indeed be the best choice, so long as you don’t want more powerful bass than a reference IEM like that provides.

  25. Let me throw in some additional recommendations I think would fit what you want well. Both offer tunable bass levels so you can find just the right amount for your taste, and both offer exceptional spaciousness.
    AAW AHMorph W500 – Very lush, involving mids with exceptional overall performance that is a bit on the forward side. To my ears, there is no comparison between these and the DN-1000, although it is above your budget.
    – Perfect Seal Fusion 11 – While it isn’t too different from the W500, the mids aren’t quite as forward (but not recessed), and it is a bit brighter. Performance isn’t at the same level, but of the few CIEMs I know of that punch above their price, this is one. I have written several comparisons in various reviews, which can be found here.

    Cheers,

    Joe

  26. Thanks a lot for your reply joker, a couple of questions
    1. How are the vocals in V6s and V3 compared to the Dunu Dn-1000? Are they more forward or similar?

    2. How does the bass compare between DN-1000 and V6s/V3/330V2? I mean in quality and extension, I love the impact of DN-1000 but it tends to sound a little boomy at times.

    3. Which of the three V6s, V3 and 330V2 would work with most number of genres? And which of the three would sound good even at lower volumes without sounding fatiguing?

    Thanks a lot for all your help. I am trying to make my decision by this weekend since the 1964 ears have a 10% discount going on during the weekend, so that would make a significant difference if I decided to go that way.

  27. The V3 and V6S both be on my list as more “reference”, flattened-out DN-1000 upgrades. The V6S obviously more so, being nearly flat, and the V3 somewhere between that and the DN-1000 in terms of tuning. Bass is very tight on these, especially the more balanced V6S, but treble is not the smoothest as they are still slightly v-shaped (less so than the DN-1000). If you want more mids and smoother treble in a similar price range, there’s the Custom Art Pro 330v2 (https://theheadphonelist.com/brief-impressions-custom-art-harmony-8-pro-pro-330-v2/), but you give up some of that spaciousness and clarity that the brighter, more v-shaped sound of the V6S provides.

  28. Hello joker and joe,,

    I had earlier asked for advice on new iems in the recommendation by sound signature thread and joker recommended me the EPH-100 by the earphones I had owned previously. I was going to buy those but came across a really great deal for Dunu DN 1000, and thought I can try a different sound signature and see how I like it. I have really started to enjoy these but there are certain things that make me yearn for more, so I decided I should jump in on a ciem and see. What I found lacking in the presentation of Dunus are the mids, especially female vocals, they sound too distant. The bass quality is amazing but a little overpowering while I love the treble extension sometimes it sounds weird and they can be a little more smoother. Love the clarity of these and soundstage is not too bad.

    What I am looking for in a new pair of CIEMs is good midrange for vocals with good extension on both ends, deep bass with smooth treble but not rolled off. More 3D like presentation airy and spacious with slight warmth.

    The CIEMs I had shortlisted are 1964 V3 and V6S. I am open to other suggestions with a budget of around $1000, preferably lower.

    Thank you!

  29. Hi Ziv,

    Good question “why complementary.” Sure, you can combine two products with like characteristics, but that tends to over-emphasize those characteristics, which reduces the natural, realistic sound that makes these high-performance pieces of gear great. For example, if you want really really analytical, sure, you can combine an analytical player with analytical headphones, but there will be tradeoffs. For example, the notes (ADSR characteristics, or attack, decay, sustain, and release) may become very sharp due to say a short release for both components. In the case of a very short release, notes wouldn’t reverberate as they should and reflections and other nuances would not be audible.

    As far as other DAPs, I unfortunately haven’t heard many others as of late, but I know there are some out there. Is the DX90 more detailed? Yes, but to me a natural, realistic presentation is more important. I will give up a bit of detail for a better overall sound vs. saying I can hear extra detail that is presented “wrong” by my interpretation. Hiss isn’t an issue with either player considering the JHA sensitivity. Others may pose issues, such as the EarWerkz Legend-R, which has an ever-so-slight hiss with the DX90.

    Hopefully this answered your questions. Please let me know if you have any other questions.

    Cheers,

    Joe

  30. Oops, I’ve accidentally wrote the reply to your answer as a new message. This is the correction…

    Thanks a lot for the answer. That’s great to hear you have tried both, hopefully I’ll be able to finally decide which way to go…

    Just to understand the way of thinking (I’m still learning the business ☺): Why complementary characteristics is what one should look for? Say some IEMs sound more analytic, why not pair it with an analytic sounding DAP to maximize this effect? This question might be super-dumb but I’ll risk it ☺.

    Is there any third-party DAP that you would recommend over these two? I don’t mind spending a bit more if there is a real difference in SQ (in other aspects, the X5 and DX90 should suffice).

    Did you actually find the DX90 to be more detailed than the X5? This was something I came by quite often when I did some reading and details are my soft-spot. |joker| said that background hiss and high output impedance are both very undesirable with the JH13. How are the X5 and DX90 in this regard?

  31. Thanks a lot for the answer. That’s great to hear you have tried both, hopefully I’ll be able to finally decide which way to go…

    Just to understand the way of thinking (I’m still learning the business ☺): Why complementary characteristics is what one should look for? Say some IEMs sound more analytic, why not pair it with an analytic sounding DAP to maximize this effect? This question might be super-dumb but I’ll risk it ☺.

    Is there any third-party DAP that you would recommend over these two? I don’t mind spending a bit more if there is a real difference in SQ (in other aspects, the X5 and DX90 should suffice).

    Did you actually find the DX90 to be more detailed than the X5? This was something I came by quite often when I did some reading and details are my soft-spot. |joker| said that background hiss and high output impedance are both very undesirable with the JH13. How are the X5 and DX90 in this regard?

  32. Hi Ziv, I have experience with both Fiio and iBasso products and find that there tends to be a preferred pairing depending on the CIEM manufacturer. For the JHA products, the Fiio products pair better due to the complimentary characteristics as the JHA products have a bit of a laid-back sound while the Fiio products are more up-front than the iBasso products resulting in a more natural sound. I haven’t heard the pairing with a JH13 though.

    Let me know if you want additional clarification or have any other questions.

    Cheers,

    Joe

  33. Hi, great reviews and very helpful!

    After reading both lists by you and |joker| I have a question regarding which DAP should I pair with JH13. I’ve tried asking |joker|, which was very helpful but I’d still ike to get you take on thing as well (if you don’t mind of course :).

    My DAP budget is up to 400 USD. I’ve done some reading and found that the Fiio X5 and the DX90 are very well though off in this price range. Both have a decent UI and build quality and the X5 is stronger on the battery side. But putting all of this aside – which will pair best with the JH13s?

    Initially, I was thinking about getting JH16s, mainly because I only now read this review and finally got a good grasp of the technical terms that accurately describe what I am actually looking for; the JH16s are not it, being to heavy on the bass side. I’ve read a lot of good reviews about the DX90 but got the impression of it also having a rather dominant mid-bass. Therefore, I felt maybe the Fiio X5 will be an better fit so that the bass won’t become over-powering. Nonetheless, all the rest of what DX90 has to offer, I generally prefer it over the X5 (especially that it is great with details and accuracy). However, now that I’ve got the JH13 on sight, the pairing with DX90 sound more natural, since I don’t mind bass, I just want it balanced with the rest of it. I’d be very happy to hear what do you think of this and which DAP do you recommend. If there is a thirdfourth option(s) I should consider – I am in now way fixed on getting either of these two DAPs.

    Thanks a lot!!

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent posts

Sponsors

Categories