Home » Reviews » Earphones » Moondrop Blessing 2 Review – All The Boxes

Moondrop Blessing 2 Review – All The Boxes

Pros –

Very linear tuning, Outstanding detail retrieval, Excellent imaging and separation, Impressively source agnostic, Great design and cable

Cons –

Larger housings, Slightly strained upper-midrange, Slightly thin lower-treble

Verdict –

Few competitors create as well-rounded a package as the Blessing 2, this is a balanced and refined earphone that punches well above its asking price.

Introduction –

If you frequent any kind of audio for a, you will be well acquainted by now with Chinese cult-hit Moondrop. For the company has achieved huge renown in a very short time, no small feat, with their excellent VDSF tuning based on the coveted diffuse field neutral curve. The Starfield assumed such a tuning, that permit surprising refinement at a reasonable price. However, though tonality impressed, the quality of the driver did leave me wanting. The Blessing 2 looks like a fine solution, assuming a very similar tuning realised through an elaborate 5-driver hybrid setup. The Blessing 2 implements 3D printing for physical band and low-pass filtering used in conjunction with electronic RC filtering to deliver a phase-coherent 3-way setup and very specific control over the frequency response. That’s a load of engineering for a midrange IEM.

The Blessing 2 retails for $319 USD. You can read more about it and purchase one for yourself on HiFiGO and Apos Audio.

Disclaimer –

I would like to thank Nappoler from HiFiGO very much for his quick communication and for providing me with the Blessing 2 for the purpose of review. All words are my own and there is no monetary incentive for a positive review. I paid a slightly reduced cost for the earphones in return for honest evaluation and will attempt to be as objective as possible.

Specifications –

  • Impedance: 22 ohms @ 1 kHz (+/- 15%)
  • Drivers: 1 Dynamic Driver & 4 Balanced Armatures on each side
  • Frequency Response: 9 Hz – 37 kHz
  • Effective Frequency Response: 20 Hz – 20 kHz
  • Treble Driver: Knowles SWFK
  • Midrange Driver: Softears D-MID-A
  • Bass Driver: 10mm Paper Cone Diaphragm Coil
  • Quality Control Range: +/- 1 dB @ 1 kHz
  • Sensitivity: 117 dB/Vrms @ 1 kHz
  • THD: <1% @ 1 kHz
  • Interface: 0.78 mm – 2 pin

The Pitch –

Hybrid Acoustic and Electronic Filters

The Blessing 2 implement physical band-pass filtering that isolates one pair of the BA drivers to exclusively cover the midrange frequencies. The BA drivers are a custom 2 in one unit from Soft Ears Japan tuned to their specifications. Similarly, Moondrop use a physical low-pass filter to limit the DD to bass under 400Hz in addition to controlling pressurization. An electronic RC filter is also utilised to reinforce this. SFWK tweeters provide extended high-frequencies and special attention was given to unite the sensitivities of all drivers acoustically rather than electronically for a phase-coherent design.

VDSF Tuning

Neutral has become a more subjective term over the years as more minds contribute to different curves simulating different acoustic environments. Most famous are the Diffuse and newer Harman curve, both have their share of fans and critics. Moondrop’s first IEMs traced the Harman Curve incredibly well, a selling point for the company and sound foundation for developing their own curve called virtual diffuse sound field (VDSF). Similar to its name, this is Moondrop’s appropriation of the diffuse-field neutral curve, not the Harman Curve. Comparatively, they’ve toned down the highs and upped the bass which is, to my ear, a combination between the two aforementioned curves. Though both diffuse-field and Harman are considered by most critics not to showcase great balance, the VDSF curve is a refined and mostly natural-sounding tuning that is a very effective mashup.

Unboxing –

Moondrop always package their products professionally and the Blessing 2 is no exception. The outer sleeve houses specifications and Moondrop’s famous anime splash art. Inside is a clean grey box adorned with Moondrop’s logo. Opening the box reveals the carrying case and separate card box with additional accessories. The earphones are protected within a foam inlet inside the zippered case, it has a nice textured vinyl exterior in svelte grey and ample interior space for the earphones and a small DAP too.

The box contains the rest of the accessories, a 6n OFC Litz cable, airline adapter, papers and 6 pairs of silicone ear tips. The tips have an interesting design, the bore fits exactly onto the Blessing 2’s nozzles but the size of the sound output has been reduced likely to slightly attenuate high frequencies and create a more balanced sound.

Design –

The Blessing 2 is a very attractive earphone to my eye, an impression enhanced by a certain amount of customisability on the user’s end. The 3D printed shells are as you’d expect; perfectly smooth, seamless and unibody, they’re also resin-filled for a nice quality heft in the hand. Meanwhile, the transparent design showcases the acoustics inside and driver setup, you can study them for hours. This is topped with CNC machined faceplates with a brushed finish. Buyers are able to order wooden variants and custom artwork for an additional $30, or choose from 8 set options provided by Moondrop.

The cable too inspires confidence, I’ve personally had a great experience here. Up top, they utilise a standard 0.78mm 2-pin connector with wide aftermarket support. It’s a 4-core braided unit with soft, smooth jacket and very supple feel, the cable is slightly thin but feels well anchored at all terminations. There’s also zero memory so the cable isn’t too tangle-prone, and it conducts minimal microphonic noise. The well-relieved right angle plug and metal Moondrop y-split cover add a premium feel while the pre-moulded ear guides provide a comfortable and stable fit. I personally enjoy the contrast created between the copper cable and silver housings.

Fit & Isolation –

If there’s one thing that may polarise about the Blessing 2’s design, it’s likely the fit. They are ergonomic in their design for sure, but definitely also on the larger side. They aren’t ridiculously proportioned nor do any design decisions come at the cost of ergonomics. This is a rounded, smooth and generally comfortable design with well-angled nozzles that promote a deeper, more stable fit and strong seal. I didn’t experience any hotspot formation, albeit due to the size, they don’t disappear in the ear. Those with smaller than average ears may experience difficulties due to the height of the earphone as the tops lock-in somewhat to the anti-helix area.

With the right tips, they achieve a deep and comfortable fit. In turn, though reasonably large and quite wide, the fit is lower-profile, hugging the contours of the ear. You can’t sleep on them due to the width but wind noise is not too bad despite the presence of a faceplate vent. Similarly, isolation is well above average and easily suitable for commute and public transport. You would benefit from a fully-sealed design in especially noisy areas such as the metro or air travel, but the Blessing 2 is passable here too, especially with foam tips.

Next Page: Sound, Comparisons & Verdict



Ryan Soo

Ryan Soo

Avid writer, passionate photographer and sleep-deprived medical student, Ryan has an ongoing desire to bring quality products to the regular reader.


Leave a Reply

Your email address will not be published. Required fields are marked *

Recent posts